of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

ANT ASI4517R3v06 2496 Datasheet

Category:

Documents

Publish on:

Views: 1,338 | Pages: 2

Extension: PDF | Download: 25

Share
Description
ANT-ASI4517R3v06-2496 Datasheet
Transcript
  1  ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690- 65/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Mechanical Properties  Antenna dimensions (H x W x D) (mm) 1999 x 429 x 196 Packing dimensions (H x W x D) (mm) 2220 x 530 x 275  Antenna weight (kg) 36.0 Clamps weight (kg) 5.8 (2 units)  Antenna packing weight (kg) 52.8 (Included clamps) Mast diameter supported (mm) 50 - 115 Radome material Fiberglass Radome colour Light grey Operational temperature ( ℃ ) -40 .. +65 Wind load (N) Frontal: 910 (at 150 km/h) Lateral: 265 (at 150 km/h) Rear side: 910 (at 150 km/h) Max. operational wind speed (km/h) 200 Survival wind speed (km/h) 250 Connector 12 x 4.3-10 Female Connector position Bottom  Accessories   Item Model Description Weight Units per antenna Downtilt kit ASMDT0F01 Mechanical downtilt: 0 - 12 °  3.1 kg 1 (Separate packing) Electrical Properties Frequency range (MHz) 2 x (690 - 960) 4 x (1695 - 2690) 690 - 803 790 - 862 824 - 894 880 - 960 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 Polarization +45 °  , -45 °  Electrical downtilt ( ° ) 0 - 10 , continuously adjustable , each band separately 2 - 12 , continuously adjustable , each band separately Gain (dBi) at mid Tilt 14.9 15.5 15.8 16.0 over all Tilts 14.7 ± 0.5 15.3 ± 0.5 15.6 ± 0.5 15.8 ± 0.5 Bottom at mid Tilt 15.5 15.9 16.4 16.7 over all Tilts 15.4 ± 0.5 15.8 ± 0.5 16.3 ± 0.4 16.6 ± 0.6 Top at mid Tilt 15.0 15.4 15.7 16.2 over all Tilts 14.9 ± 0.6 15.3 ± 0.6 15.6 ± 0.5 16.1 ± 0.5 Side lobe suppression for first side lobe above main beam (dB) > 16 > 16 > 17 > 16 > 17 > 16 > 17 > 16 Horizontal 3dB beam width ( ° ) 68 ± 4 63 ± 3 61 ± 3 60 ± 3 63 ± 5 62 ± 5 61 ± 5 60 ± 5 Vertical 3dB beam width ( ° ) 10.5 ± 0.9 9.5 ± 0.8 9.2 ± 0.7 8.5 ± 0.7 Bottom 10.4 ± 0.6 9.4 ± 0.5 8.1 ± 0.3 7.4 ± 0.3 Top 9.7 ± 0.6 8.9 ± 0.5 7.9 ± 0.3 7.1 ± 0.3 VSWR < 1.5 Cross polar isolation (dB) ≥  28 ≥ 28 Interband isolation (dB) ≥ 28 Front to back ratio, ± 30 °  (dB) > 22 > 25 > 25 > 24 > 25 > 25 > 25 > 25 Cross polar ratio (dB) 0 °  > 18 > 18 > 18 > 20 > 20 > 20 > 20 > 20 Max. power per input (W) 500 (at 50 ℃  ambient temperature) 250 (at 50 ℃  ambient temperature) Total power (W) 1000 (at 50 ℃  ambient temperature) Intermodulation IM3 (dBc) ≤  -153 (2 x 43 dBm carrier) Impedance (Ω)  50 Grounding DC Ground 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.  Antenna Specifications    1   9   9   9  106    1   2   7   3   Integrated RET Specifications * Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Properties RET type Integrated RET RET protocols* AISG 2.0 / 3GPP Input voltage range (V) 10 - 30 DC Power consumption (W) < 6 (motor activated, 12V) < 1.5 (stand by, 12V)  Adjustment time (full range) (s) < 65 (typically, depending on antenna type) RET connector 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin assignment according AISG 1 2 3 4 5 6 7 8 DC n/c RS-485B n/c RS-485A DC DC return n/c Lightning protection (kA) 3 (10/350 μ s) 10 (8/20 μ s) Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification:  CE, FCC, IC, RCM 2  Any previous datasheet issues become invalid. Issue: 2017-04-26 Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna  ASI4517R3v06 DXXXXXX-690-960/690-960/1695-2690/1695-2690/1695-2690/1695-2690- 65/65/65/65/65/65-16i/16i/16.5i/16.5i/16.5i/16.5i-M/M/M/M/M/M-R EasyRET 2L4H 12-Port Antenna with 6 Integrated RCUs - 2.0m Pattern sample for reference  1. Facilities, such as towers and poles, must bear the weight and wind load of antennas. 2. HUAWEI ‘s standard brackets and accessories must be used for any installation. 3. The antenna working environment must meet the requirements specified in the datasheet. 4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements described in the antenna installation guide. NOTE 1695 - 2690 MHz (Bottom) 690 - 960 MHz r - Red y - Yellow L - Left array R - Right array T - Top array B - Bottom array HWMxxx……LBy1 HWMxxx……LTy2 HWMxxx……...Lr1 HWMxxx...…RTy4 HWMxxx...…RBy3 HWMxxx…..…Rr2 Integrated RET S/N: LTy2 RBy3 Lr1 Rr2 LBy1 RTy4 1695 - 2690 MHz (Top)
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks