of 48
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

- PDF

Category:

Entertainment & Humor

Publish on:

Views: 3 | Pages: 48

Extension: PDF | Download: 0

Share
Description
' N89 26'11 W 8 WM BEALLES DEPARTMENT STORE EXISTING HH GREGG EXISTING 14 SCREEN MOVIE THEATER ' HC HC HC HC N00 33'49 E 14 screen movie theater 1 AC Site 1/32 = 1'0 OVERALL SITE PLAN JACKSONVILLE.
Transcript
' N89 26'11 W 8 WM BEALLES DEPARTMENT STORE EXISTING HH GREGG EXISTING 14 SCREEN MOVIE THEATER ' HC HC HC HC N00 33'49 E 14 screen movie theater 1 AC Site 1/32 = 1'0 OVERALL SITE PLAN JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED WH 5 6' 6 7/8 9' 8 1/2 9' 8 1/2 9' 8 1/2 8' 3 5/8 MERCHANDISE CART AREA 2' 4 KEG COOLER 24 4 OPENING ABOVE XL 12 ARCADE FRIDGE 11 FRIDGE 11 ø 5' 0 AC 1ST FLOOR 3/32 = 1'0 1ST FLOOR OVERALL JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED 110' 4 WH 5 JAN ROOF ACCESS LADDER SLOPED CAP OVER ENTRY OPENING ø 5' 0 112' 6 OPENING TO BELOW 115' 0 XL ' 0 SLOPED CAP OVER ENTRY OPENING AC VIP LEVEL 3/32 = 1'0 VIP LEVEL OVERALL JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM FIXED SEATS + 5 WHEELCHAIR POSITIONS 3 AC4 5 AUDITORIUM 1 FROM BALCONY WHEELCHAIR 1 AUDITORIUM 1 VIP LEVEL 1/8 = 1'0 ' 6 3' 0 20' 3 AUDITORIUM 1 EAST WALL 1/8 = 1'0 VIP LEVEL 115' 0 First Floor 100' 0 2 AC4 AUDITORIUM 1 1ST FLOOR 1/8 = 1'0 AUDITORIUM SEATS INCL. 5 WHC AUDITORIUM # 1 ( TYPE 1) AUDITORIUM 1 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM 2 93 FIXED SEATS + 4 WHEELCHAIR POSITIONS 3 AC5 4 AUDITORIUM 2 BALCONY VIEW WHEELCHAIR 2 AUDITORIUM 2 VIP LEVEL 1/8 = 1'0 AC5 AUDITORIUM # 2 ( TYPE 2) 3 AUDITORIUM 2 EAST WALL 1/8 = 1'0 1 AUDITORIUM 2 1ST FLOOR 1/8 = 1'0 AUDITORIUM 2 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM 2 47 FIXED SEATS + 2 WHEELCHAIR POSITIONS 3 AC6 97' 0 98' 6 101' 6 103' 0 4 AUDITORIUM 3 (4,5&6) WHEELCHAIR VIEW 2 AUDITORIUM 3 VIP LEVEL (4,5,6 SAME) 1/8 = 1'0 3 3 AUDITORIUM 3 EAST WALL 1/8 = 1'0 29.3 LOW PROJECTION 113' 0 First Floor 100' 0 1 AC6 AUDITORIUM 3 1ST FLOOR 1/8 = 1'0 AUDITORIUM # 36 ( TYPE 6) AUDITORIUM 3 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM FIXED SEATS + 5 WHEELCHAIR POSITIONS AC AUDITORIUM 7 BALCONY VIEW WHEELCHAIR 2 AUDITORIUM 7 BALCONY LEVEL 1/8 = 1'0 AC VIP LEVEL 115' 0 First Floor 100' 0 AUDITORIUM # 7 & 10 ( TYPE 4) 3 AUDITORIUM 7 EAST WALL1 1/8 = 1'0 1 AUDITORIUM 7 1ST FLOOR 1/8 = 1'0 AUDITORIUM 7 AND 10 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM FIXED SEATS + 5 WHEELCHAIR POSITIONS AC AUDITORIUM 8 BALCONY VIEW 2 AUDITORIUM 8 VIP LEVEL 1/8 = 1'0 AC ' 0 AUDITORIUM 8 EAST WALL1 1/8 = 1'0 AUDITORIUM 8 1ST FLOOR 1/8 = 1'0 WH AUDITORIUM # 8 & 9 ( TYPE 5) AUDITORIUM 8 & 9 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM FIXED SEATS + 4 WHEELCHAIR POSITIONS AC9 3 4 AUDITORIUM 11 WHEELCHAIR VIEW 2 AUDITORIUM 11 VIP LEVEL 1/8 = 1'0 AC AUDITORIUM 11 EAST WALL 1/8 = 1'0 VIP LEVEL 115' 0 First Floor 100' 0 1 AUDITORIUM 11 1ST FLOOR 1/8 = 1'0 AUDITORIUM # 11 ( TYPE 6) AUDITORIUM 11 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM FIXED SEATS + 6 WHEELCHAIR POSITIONS AC AUDITORIUM 12 WHEELCHAIR VIEW 2 AUDITORIUM 12 VIP LEVEL 1/8 = 1'0 37' 8 19.5 AC AUDITORIUM 12 (XL) EAST WALL 1/8 = 1'0 1 AUDITORIUM 12 1ST FLOOR 1/8 = 1'0 AUDITORIUM # 12 ( TYPE 7) AUDITORIUM 12 JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED AUDITORIUM FIXED SEATS + 2 WHEELCHAIR POSITIONS AUDITORIUM 13 (VIP) SEATS INCL. 2 WHC ' 4 16' 2 2 AUDITORIUM 13 EAST WALL VIP 1/8 = 1'0 AUDITORIUM 13 (VIP) SEATS INCL. 2 WHC 2 3 AUDITORIUM 13 AND 14 VIP WHEELCHAIR VIEW 1 AC11 115' 0 116' 0 AUDITORIUM 13 VIP (14 SAME) 1/8 = 1'0 117' 0 118' 6 AUDITORIUM # 13 & 14 ( TYPE 7) AUDITORIUM 13&14 VIP JACKSONVILLE. FL TK Architects International Inc ALL RIGHTS RESERVED The Mobilift CX Portable Wheelchair Lift Specifications and Technical Reference Product Abstract Load Lift Leave The Mobilift CX is a multipurpose, portable wheelchair lift that provides access to school stages, outdoor bleachers an elevated platforms. Over 1000 units are used in schools, colleges, churches, auditoriums and historic buildings to provide handicapped access. The lift is ideal where structural modifications are impractical, unattractive, too costly or prohibited for historic reasons. Unlike other vertical platform lifts, the Mobilift CX is manually powered making it easy to use and highly portable. The absence of batteries, hydraulic and electric components make the lift extremely reliable and virtually maintenance free. Mobilifts can be customized to accommodate unique situations minimizing the chance that you will have to incur costly structural modifications to your facility. With its reasonable purchase price, the Mobilift is an economical way to make your location handicapped accessible instantly!. Weight & Dimensions The Mobilift CX is manufactured to exacting tolerances using aluminum and stainless steel. Critical components have been tested successful for extreme weather performance from 50 to +130 F to ensure lowcost, troublefree use. The lift conforms to stringent safety requirements with each lift factory load tested to 3000 lbs. five times the rated load. Typical lifting time: 20 seconds to maximum height of 60 Maximum lifting height: 60 (1.52m) Crank force required: 5 lbs to lift 150 lbs., 11 lbs. To lift 300 lbs. Capacity: 600 lbs (275kg) Lift weight: 265 lbs. (120 kg) Lift height: 66 (1.67m) Lift width: 37.5 (0.95m) Length: 72 (1.83m) Platform size: 34 X 56 (0.86m X 1.42m) Accommodates a large wheelchair or scooter Bridge ramp size: 20 L X 32 W (0.51m X 0.81m) Note: Other ramp sizes are available as an option Warranty: 2 years from date of invoice Mobilift CX Portable Wheelchair Lift Deployment Details Load The Mobilift CX loads from a ground ramp which folds down to the platform. The lift s platform is large enough to accommodate electric wheelchairs or scooters. No special training or expertise is required to operate the Mobilift Pictogram decals clearly depict the lift s operating instructions. Self sufficient no power is required. Lift 20 seconds is the typical rime to the maximum elevation of lbs. Of crank force is required to lift 150 lbs. 11 lbs of crank force is required to lift 300 lbs. Capacity is 600lbs; all lifts are factory tested to 3000 pds. Leave The Mobilift unloads using a bridge ramp. Bridge ramps are available in different lengths to clear stairs or other obstacles. Moving & Storage The Mobilift moves and stores easily and quickly. 4 lbs. of force on level ground is all that is required to start a Mobilift moving as easy as moving a shopping cart. Rolls well over uneven surfaces for outdoor stage or bleacher access. Mobilifts weigh approx. 265 lbs. And can be transported in the back of any size pickup truck Options Weather protection Enclosed shed Open mesh shed Tarp shed Loading from right side Stair bumper Oversize platform Narrowdoorway option Lefthand side cranking Mobile bridge ramp Powder coated main structure Choice of ramp lengths: 10 (0.25 m) 30 (0.76 m) 40 (1.0 m) 50 (1.27 m) 60 (1.52 m) CE certification for European customers Mobilift CX Portable Wheelchair Lift Mobilift CX Testimonials The Mobilift manual wheelchair lift is exactly what we needed. It is easy to use and move around, yet once the mechanism is set in place, it is solid and stationary. We have been pleased in using it to get our wheelchair students onto the stage in our auditorium. When we do not use it, we wheel it into a corner where it is out of the way. I would recommend this unit for other schools. May Beyda, Principal John L. Bernstein School Our University has many historical buildings which were not designed or entry by the disabled. The lift is very mobile, easy to position, easy to operate and flexible. Operators need minimum training and the device is low in maintenance time and cost. We have used the lift in garden areas where electrical sources are nonexistent. Warranty Bill Bohn, Project Manager University of Virginia Every Mobilift carries a 2 year warranty from the date of invoice. The lift is also covered by aftersales support and assistance. Parts can generally be shipped within 48 hours. Sample Customer List Tel.: Web: Arizona State University, AZ Bank One Ballpark Phoenix, AZ City of Rancho Cucamonga, CA Long Beach Transit, CA Glendale Unified Schools,CA Sinai Temple, CA University of Colorado, CO Salem Board of Education, CT Georgetown University, DC Washington Convention Ctr., DC Boca Raton Historical Society, FL Hilton Waikoloa Village, HI Chicago Public Schools, IL Fayette County Schools, IL Red Oak Schools, IA Oakdale Baptist Church, IN Purdue University Rossville High School, KS Murray ISD, KY Louisiana Tech, LA Harvard University, MA Tufts University, MA United Cerebral Palsy, MA Fort Detrick Military Base, MD Northville Public Schools, MI Biloxi Public Schools, MS Bethel Baptist Church, NC Minot Public School District, ND Somerset Schools, NJ Reno Sparks Convention Ctr, NV Mayor of New York, NY Killen ISD, TX Canterbury Cathedral, UK London Metropolitan Univ., UK Ascension Virtuoso 5460F Model Series Vertical Wheelchair Lift Product Specifications SECTION AND SECTION PART 1 GENERAL 1.1 SYSTEM DESCRIPTION A. The product described herein is an unenclosed, selfcontained vertical wheelchair lift, manufactured by Ascension, intended for the exclusive use of individuals with disabilities. The lift shall require minimal modifications to the using facility. The lift shall consist of a platform supported by an electrohydraulic lifting mechanism. The lift shall be low profile (no machine tower) to maintain viewing lines. The lift shall provide for independent use by individuals with disabilities and include all applicable operating and safety devices for compliance with ADA requirements. The lift shall have a slim profile platform frame to eliminate the need for a pit or access ramp on the lower landing side and facilitate easy entry into the lift directly at floor level by patrons. The lift shall provide adequate lifting force to raise the platform and occupant to a height suitable for access to most stages, platforms, or similar elevated surfaces. 1.2 REFERENCES A. The lift shall be designed and tested in accordance with ASME A18.1, ASME A17.5, ADAAG, ANSI A117.1, and NFPA 70 (NEC). 1.3 SUBMITTALS A. Submit manufacturer's drawings and product data for approval. Drawings shall show dimensional and wiring requirements. 1.4 QUALITY ASSURANCE A. Manufacturer shall be ISO 9001:2008 registered. B. Manufacturer shall have not less than ten (10) years of experience in the design and manufacture of vertical wheelchair lifts. C. Lift shall be installed in accordance with all applicable codes. 1.5 WARRANTY A. Manufacturer shall provide a warranty for a period of twenty (20) years on the drive train, five (5) years on all other components, and one (1) year on labor, starting from the date of installation. B. Extended warranty plans are available. 1.6 MAINTENANCE A. Maintenance of the lift shall consist of regular cleaning as deemed necessary by the using facility. General inspection, maintenance, and lubrication shall be specified in the manufacturer's service manual. PART 2 PRODUCT 2.1 MANUFACTURER A. Ascension Virtuoso 5460F Model Series vertical wheelchair lift, manufactured by Ascension, 3526 E. Fort Lowell Rd., Tucson, AZ, 85716, Tel: or , Fax: , B. Acceptance of other products is subject to compliance with specified requirements and owner or architect approval. 2.2 PHYSICAL CHARACTERISTICS A. Lifting capacity: 750 pounds [341 kg]. B. Vertical speed: seven (7) feet per minute [2.1 meters per minute]. C. Vertical travel: 12 [304 mm] to 60 [1524 mm], infinitely adjustable. D. Standard platform gate configuration: the upper landing platform gate shall be lefthinged when facing the lift from the upper landing; the lower landing platform gate shall be righthinged when facing the lift from the lower landing. Contact Ascension for custom platform gate configurations. 2.3 DIMENSIONS A. Platform size: 36 x 54 [914 mm x 1371 mm] with 43 [1092 mm] high sidewalls and platform gates. PO Box Tucson, AZ TEL: FAX: /23/12 Form B Rev: 8 B. No part of the lift shall stand over 44 [1117 mm] high when the platform is on the ground (with the exception for when the optional stage guard is being used). 2.4 MATERIALS A. The base frame and guide rails shall be constructed from ASTM A 36 structural steel, 1/4 [6.35 mm] thick minimum. B. The platform shall be constructed from ASTM A 36, AISI 1018, or AISI 1020 Steel. C. The windows shall be fabricated from 1/4 [6.35 mm] thick high impact strength clear thermoplastic. D. The safety skirt shall be constructed from rigid plastic. 2.5 FINISH A. All metal components shall be thoroughly cleaned to remove any foreign substance. Exposed metal surfaces shall be finished with an ovenbaked powder coating. B. Standard color is black; contact Ascension for custom color selection. 2.6 DRIVE TYPE A. Drive shall be directacting hydraulic. 2.7 ELECTRICAL REQUIREMENTS A. Electrical contractor shall provide a 120VAC, 60 hertz, single phase, 15 amp service line (option: international electrical configurations available). B. All control and operating circuits shall be serviced by a 12 VDC power supply. C. Electrical components shall be UL listed and CSA registered. D. Electrical system shall be certified to ASME A17.5 by an independent testing laboratory. 2.8 SAFETY DEVICES The lift shall include the following safety features for protection of the passenger and general public. A. Grounded electrical system. B. 12 VDC operating controls. C. Constant pressure operating switches. D. Emergency stop button at passenger control station. E. Electromechanical interlock to prevent accidental opening of lower landing side platform gate. F. Switches to prevent platform movement if either platform gate is open. G. Safety skirt that completely encloses and protects the area under the platform, with switches to stop platform movement in the case of excess skirt deflection. H. 43 [1092 mm] high sidewalls and platform gates. I. Unobstructed view through transparent sidewalls and platform gates. J. Grab bar extending full length of inside wall. K. Slip resistant surfaces on platform floor. L. Structural safety factors as specified in ASME A18.1. M. Selfclosing platform gates. N. Alarm and lighted alarm switch on platform. O. Upper landing gate (where required by code) Ascension Virtuoso Model 5460FG. 2.9 OPERATING CHARACTERISTICS A. Lift shall include three (3) constant pressure UP/DOWN switches, located outside of the platform at both ends and inside the platform. B. The passenger control station shall be provided with a separate PUSH TO STOP emergency button. The emergency stop button shall lock when pushed and require manual reset before operation can resume. C. The lower landing side platform gate shall be provided with a mechanical interlock that prevents the platform gate from being opened whenever the platform is more than 2 [50 mm] above the full down position. PART 3 EXECUTION 3.1 EXAMINATION A. Verify suitability of substrate preparation in accordance with approved manufacturer's drawings. B. Verify correct space requirements in accordance with approved manufacturer's drawings. C. Verify electrical service is of correct type and at correct location. PO Box Tucson, AZ TEL: FAX: /23/12 Form B Rev: 8 3.2 INSTALLATION A. Lift shall be installed in accordance with architect's approved plans and specifications, manufacturer's instructions, and ASME A18.1 requirements. 3.3 FIELD QUALITY CONTROL A. Perform acceptance tests as required by code and the authority having jurisdiction. Place rated load on platform and operate for several cycles to verify correct installation and operation. No mechanical failures shall occur and no wear that would affect the reliability of the lift shall be detected. NOTE: This specification has been written to assist in preparing a detailed description of a vertical wheelchair lift. Additional technical information may be obtained from Ascension. Specifications are also available electronically at Specifications are subject to change. U.S. Patent Nos. 7,721,850 and 8,079,447. Other U.S. Patents Pending. PO Box Tucson, AZ TEL: FAX: /23/12 Form B Rev: 8 Wheelchair Lifts High Capacity Low Profile Wheel Chair Lift Page 1 of 7 7/1/2014 Planet Mobility's PL36 Hoists Direct Inc. hoistsdirect.com Industrial Hoist Equipment. Raising the Standard for Hoists. PL36 Wheelchair Lift The PL36 Wheelchair Lift lowers flush to the floor to allow wheelchair users to easily get on and of the lift with no need for a ramp or pit. Product Specifications Standard Features: Service range: 1 to 36 Platform size: 32 x 52 Overall size: 52 wide x 56 long Controls mounted in the power unit (integrated in handrail) Wheelchair Lifts High Capacity Low Profile Wheel Chair Lift Page 2 of 7 7/1/2014 Weather tight power unit and controls Platform controls: constant pressure push button Key lockout of controls Rated load capacity: 750 lbs. Industrial 2 HP DC motor Power supply: 110V AC Single Phase 12V DC operation (lift runs independent of AC power) 12V DC also provides backup operation in case of power failure Battery charge indicator gauge Drive system: electric hydraulic with hydraulic actuators Manual relief valve Safety internal brass velocity fuse Aluminum pump and manifold with integral valves Adjustable upward travel limit switches Minimum 42 high guards with midrails and 8 solid sides 6 bridge on both ends Automatic flipup ramp/runoff guard on platform entrance 2 inch/second lift speed Integral maintenance supports Rollers Cold finished steel with case carburizing to.010 inch Pins Cold rolled and finished to bearing manufactures specifications Bearings Selflubricating with compressive strength of 44,000 psi Enamel paint with heavy duty clear coat finish Standard colors: beige, brown, black, or white Nonslip platform surface Cold temperature synthetic hydraulic fluid (20F to 120F) Arched Folding Ramps titanramps.com Pair of 7'.5 arched ATV ramps. Only $124 limited discount item Lift & Move Heavy Loads WoodMaxx 6' PTO Backhoe Missouri Stair Lift Vertical Lift Sale Wheelchair Lifts High Capacity Low Profile Wheel Chair Lift Page 3 of 7 7/1/2014 Options: Solid steel sides Solid Plexiglas sides Solid steel shroud surrounding lift Accordion skirting on sides Upper platform gate with interlock Grab rail (solid sides required for this option) Safety underplatform guard Aluminum hinged bridge Call / Send station (attendant operation) Custom colors to match customers specifications Power coat finish on deck Extreme cold temperature oil heater Wireless remote control Wheelchair Lifts High Capacity Low Profile Wheel Chair Lift Page 4 of 7 7/1/2014 Comparison The design of the PL36 wheelchair lift eliminates the need for a obtrusive tower that is required in conventional wheelchair lifts. Battery Backup & Lock Out Key is Standard on the PL 36. You will have a piece of mind knowing that if the power were to ever fail your wheelchair lift will continue to operate. Retractable Ramp & Safety Plate on both the entrance and exit. Standard on the PL36. Wheelchair Lifts High Capacity Low Profile Wheel Chair Lift Page 5 of 7 7/1/2014 Wheelchair Lift Standard Colors Wheelchair Lifts High Capacity Low Profile Wheel Chair Lift Page 6 of 7 7/1/2014 Sandy Beige Earth Brown Tuxedo Black Bright White PL36 WHEELCHAIR LIFT PL36 WHEELCHAIR LIFT Control Buttons: Standard Buttons & Key Operation On Lift Free Standard Lift Controls Plus Upper & Lower Call Send Buttons $289. Handrails: Standard Removable Handrails Free Custom Handrails $175. Ramps And Safty Plate: Standard Automatic Lower Ramp Free 22 Inch Automatic Folding Ramp At Lower Access $89. Model: Standard 32 x 52 Useable Platform Free Custom Size $400. Safety Shroud: None Full Safety Shroud & Solid Handrails $2750. Instant Internet Rebate: Redeem $50. Instant Internet Rebate Now! Redeem $50. Rebate By Receiving A Refund Check
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks