of 7
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Product Selection Guide - CERAMIC PREPREGS

Category:

Novels

Publish on:

Views: 83 | Pages: 7

Extension: PDF | Download: 1

Share
Description
Product Selection Guide - CERAMIC PREPREGS Product Description Applications Form Matrix Color AX Modified Silica Ceramic High service temp laminates for motorsports and heat shields for automotive
Transcript
Product Selection Guide - CERAMIC PREPREGS Product Description Applications Form Matrix Color AX Modified Silica Ceramic High service temp laminates for motorsports and heat shields for automotive applications Woven or UD prepreg 1475 F (802 C) For autoclave or pressing processes. Low tack. AX Oxide Oxide Ceramic Composite, Highstrength Aircraft engine components, ducting, oil & gas tubing, advanced energy, motorsports Woven or UD prepreg initial, 2000 F freestanding fire 1800 F (982 C) Structural applications AX Oxide Oxide Ceramic Composite, Low Creep / High Temperature Aircraft engine components, ducting, oil & gas tubing, advanced energy, motorsports Woven or UD prepreg initial, 2000 F freestanding fire 2000 F (1093 C) Low creep & higher temperature applications AXIOM MATERIALS, Inc Pullman St. Santa Ana, CA PRODUCT SUPPORT PHONE (949) WEBSITE FAX (949) Product Selection Guide WOVEN FIBERGLASS PREPREGS AX-3100 AX-3110 AX-3112T AX-3170 AX-3180 AX-3201 AX-3206 AX-3210 AX-3220 AX-3230 AX-3260EL AX-3270 AX-3300 AX-3500 AX-3605 AX-3611 Toughened Low Dielectric Epoxy Fiberglass Toughened, Flame Retardant Epoxy Fiberglass High Toughness Flame Retardant Epoxy Fiberglass Cyanate Ester Fiberglass Low OSU / FST Epoxy Fiberglass Fiberglass Fiberglass Vinyl Ester Fiberglass High Temperature Epoxy Fiberglass Polyester Fiberglass Epoxy Fiberglass Tooling High transmission applications, radomes Flame retardant laminates, honeycomb and foam panels High toughness, flame retardant laminates, ducting, honeycomb panels, and foam panels High service temperature laminates with low dielectric constant & low dissipation factor Aircraft interior laminates & panels, A/C ducting High strength laminates requiring good structural properties and/or high clarity High toughness laminates for prosthetics and race car industry High temperature laminates and high temperature ducting Low temperature cure, high temperature service tooling,, Off- on Off- on Off- on Off- on Light pink on Structural Epoxy Fiberglass Structural composite components High Temperature Phenolic Ballistic panels, high temperature, Laminating Fiberglass laminates Toughened Phenolic Honeycomb panels for aircraft, Fiberglass interior components High service temp laminates for, Modified Silica S-glass insulation & aircraft structures MDA-free Condensation High temp laminating, Polyimide Fiberglass applications Light amber on Cream on 200 F (93 C) Meets FAR F (82 C) Meets FAR F (93 C) 260 F (127 C) 700 F (371 C) 275 F (135 C) 300 F (149 C) 400 F (182 C) 275 F (135 C) 300 F (149 C) 125 F (52 C) initial, 380 F (193 C) final 375 F (191 C) 300 F (149 C) 300 F (149 C) Meets FAR High Temp (HT) grade available. 700 F service achieved using 550 F post cure Meets & FST / OSU Snap Cure (SC) available. Flame Retardant (FR), Snap Cure (S), and Extended Life (EL) grades available. More toughened than AX-3201 series. Styrene-free. Post cure recommended for peak performance. FR grade available. Styrene-free. Low temperature initial cure, then free-standing postcure to achieve Tg Flame retardance available. 300 F (149 C) 500 F (260 C) Resin meets MIL-R-9299C 275 F (135 C) 950 F (510 C) Press grade and layup grade available. For autoclave or pressing processes. Low tack. 640 F (338 C) MDA-free 2 Product Selection Guide WOVEN ARAMID PREPREGS AX-4110 AX-4112T AX-4151 AX-4180 AX-4201 AX-4210 AX-4220 AX-4230 AX-4270 AX-4300 AX-4500 Toughened, Flame Retardant Epoxy Aramid Flame retardant laminates, honeycomb panels, and foam panels High Performance, High toughness, FR laminates, ducting, honeycomb panels, and Aramid foam panels Modified PVB Phenolic Aramid Low OSU / FST Epoxy Aramid Aramid Vinyl Ester Aramid High Temperature Epoxy Laminating Aramid Vinyl Ester Aramid Structural Epoxy Aramid High Temperature Phenolic Laminating Aramid Toughened Phenolic Aramid, Self-Adhesive High strength and impact-resistant bonding and laminating typically for ballistic applications Aircraft interior laminates & panels, A/C ducting High strength laminates requiring good structural properties and/or high clarity High temperature laminates and high temperature ducting Structural composite components Ballistic panels, high temperature laminates Honeycomb panels for aircraft interior components,,, Off- on Off- on Off- on Off- on 180 F (82 C) Meets FAR F (93 C) Meets FAR F (135 C) 180 F (82 C) 275 F (135 C) 300 F (149 C) 400 F (204 C) Resin meets MIL-DTL-62474F Meets FAR & FST / OSU requirements Flame Retardant (FR), Snap Cure (S), and Extended Life (EL) grades available Styrene-free. Post cure recommended for peak performance. FR grade available. Pink on 275 F (135 C) 300 F (149 C) Styrene-free. Cream on 300 F (149 C) 300 F (149 C) 300 F (149 C) 500 F (260 C) 275 F (135 C) Color variations available. Flame retardance available. Resin meets MIL-R-9299C Press grade and layup grade available 3 AX-5112T AX-5170 AX-5180 AX-5201 High Toughness, Flame Retardant Epoxy Cyanate Ester Low OSU / FST Epoxy Carbon High Temp Cosmetic Epoxy AX-5202HT Epoxy Carbon Laminating AX-5204 for High-clarity AX-5205 AX-5206 AX-5209 AX-5220 AX-5260EL AX-5270 AX-5300 AX-5500 AX-5605 AX-5611 Epoxy for High Quality Surface Carbon High toughness, flame retardant laminates, ducting, & honeycomb panels High service temperature laminates Aircraft interior laminates & panels, A/C ducting High strength laminates requiring good structural properties and/or high clarity UV resistant parts requiring high thermal resistance temperature cure prepreg for UV resistant cosmetic laminates Low temp or standard temp option for laminates requiring a high quality surface and cosmetic appearance High toughness laminates for prosthetics and race car industry, High Quality Surface Epoxy High clarity, low void content laminates requiring low temperature initial cure High Temperature Epoxy Laminating Epoxy Carbon Tooling Structural Epoxy Carbon High Temperature Phenolic Toughened Phenolic Modified Silica MDA-free condensation Polyimide Product Selection Guide WOVEN CARBON PREPREGS High temperature laminates, high temperature ducting Low temperature cure, high temperature service tooling Structural composite components Carbon-carbon composites, high temperature laminates Press cured aircraft interior sandwich panels High service temp laminates for aircraft ducting and racing applications High Temp laminating applications,,,, Off- on Clear or on Light on Clear or on White or on on Cream on Amber on White or on 200 F (93 C) Meets FAR F (127 C) 700 F (371 C) 150 F (66 C) initial, 210 F (99 C) final 425 F (218 C) 400 F (204 C) 125 F (52 C) initial, 380 F (193 C) final 375 F (191 C) 325 F (163 C) 700 F service achieved using 550 F post cure Meets FAR & FST / OSU requirements. Flame Retardant (FR), Snap Cure (S), and Extended Life (EL) grades available Used extensively in autosport applications Used extensively in automotive applications Low temp cure grade available (S) More toughened than AX-5201 series Low temperature initial cure, then free-standing postcure to achieve Tg Post cure recommended for peak performance. FR grade available. Low temperature initial cure, then free-standing postcure to achieve Tg Flame retardance available. 300 F (149 C) 500 F (260 C) Resin meets Mil-R-9299C 260 F (127 C) 900 F (482 C) Press grade and layup grade available. For autoclave or pressing processes. Low tack. 640 F (338 C) MDA-free 4 Product Selection Guide - UNIDRECTIONAL PREPREGS Note: All unidirectional prepregs are available in E-glass (E), S2 Glass (S), Carbon (C), Aramid (A) reinforcements Product Description Applications Form AX-6111 General Purpose Flame Retardant Epoxy Aircraft flooring, high-rise flooring, cargo liners, high impact surfaces, UAVs, sporting goods Matrix Color Off 200 F (93 C) Meets FAR AX-6180 Low FST/OSU Epoxy Aircraft interior components, seatbacks, doublers White Meets FAR & FST / OSU requirements. AX-6200 Toughened, High Clarity Epoxy Performance sporting goods, automotive parts & components Clear or light General purpose AX-6201 High strength laminates requiring good structural properties and/or high clarity Clear or light Flame Retardant (FR), Snap Cure (S), and Extended Life (EL) grades available. AX-6206 High toughness laminates for prosthetics and race car industry White or light More toughened than AX-6201 series AX-6270 Structural Epoxy Structural composite components Cream 300 F (149 C) 300 F (149 C) Flame retardance available. PRODUCT SUPPORT AXIOM MATERIALS, Inc Pullman St. Santa Ana, CA PHONE (949) WEBSITE FAX (949) Product Selection Guide FILM ADHESIVES AX-2114 AX-2115 AX-2116 AX-2121 AX-2130 AX-2140 AX-2150 AX-2151 AX-2190 AX-2700 High Performance Enhanced Peel, High Performance Toughened Epoxy Highest Performance Temp. Cure Epoxy High Temperature, Film Adhesive Epoxy Surfacing & Finishing Modified Thermosetting PVB Phenolic Ballistic Foaming Epoxy Core Splice Adhesive Foaming Epoxy Core Sheet High performance / high peel bonding applications for metallic and composite substrates High performance / high peel bonding applications for metallic, composite, and thermoplastic substrates Aerospace grade bonding applications for metallic and composite substrates Low temperature curing / prototype development / snap curing High temperature metal / metal or composite bonding, honeycomb bonding Surface finishing of composite parts. Cocure with prepreg to reduce pitting and smooth part surfaces. Eliminates fill, fair, and repair Low weight / medium load bonding applications. Honeycomb peel strength improvement Bonding promotion and high energy load transfer between fabrics for ballistic applications Core splicing and edge-bonding of honeycomb cores and paneling Low density foaming core material for composite components Lightweight adhesive film, un un Medium weight adhesive film, small sheets Low density sheets Off- 200 F (93 C) Red 200 F (93 C) Also available un. Also available un. Off- Also available un. Cream 160 F (71 C) Blue 325 F (163 C) Grey Light Blue or or Green 200 F (93 C) Light Orange Blue or or 300 F (149 C) 300 F (149 C) Various colors available. Also available un. Also available un. May be consolidated with lightning strike materials. Low temperature cure available. Heavier weights and versions available. Typically used in aramid ballistic laminates. Available in a variety of forms. Flame retardant versions are available. Used widely in auto racing & sporting goods applications 6 Product Selection Guide ANCILLARY PRODUCTS AX-1000 AX-1001 AX-1010 AX-1014 AX-1033FR AX-1230FR AX-1300 AX-1610 AX-1611 Corrosion Inhibiting Primer High Temperature Corrosion Inhibiting Primer Structural Epoxy Paste Adhesive General Purpose, Two Component Epoxy Paste Adhesive Low Density, Flame Retardant Epoxy Core Edge Closeout Polyester Resin Solution Phenolic Sealing Resin Polyimide Sealing Resin, contains MDA Polyimide Sealing Resin, MDA-Free General purpose corrosion inhibition for metal / metal bonding General purpose corrosion inhibition for high temperature metal / metal bonding General purpose bonding of metallic or composite components General purpose bonding of masonry, concrete, composites, and metals Core edge filling of honeycomb structures Wet-layup resin or for sealing voids of finished composites Sealing and finishing of phenolic composites Sealing and finishing of polyimide composites Sealing and finishing of polyimide composites Temp, F ( C) Sprayable primer Yellow for bake 300 F (149 C) Sprayable primer Red for bake 360 F (182 C) 2-component paste adhesive 2-component paste compound 2-component, low density dough Compatible with most 250 F (121 C) film adhesives Compatible with most 350 F (177 C) film adhesives Off- Room Temp. 160 F (71 C) Meets FAR Amber Room Temp. 160 F (71 C) White Room Temp. 180 F (82 C) Clear to Off- Amber or Amber or Amber or Low viscosity. Designed for masonry-composite bonding Designed for weightsensitive applications 275 F (135 C) 300 F (149 C) Styrene-free 300 F (149 C) 500 F (260 C) Can be dyed 640 F (338 C) Can be dyed 640 F (338 C) Can be dyed Revised 12/27/2017 PRODUCT SUPPORT AXIOM MATERIALS, Inc Pullman St. Santa Ana, CA PHONE (949) WEBSITE FAX (949)
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks